Operation Panel Key Summary Table - Canon FAX-L2000 Facsimile Manual

Operation Panel Key Summary Table

When you come to a step where you must enter a number or name for data registration — in
this section, or any part of this manual and the Reference Guide — refer to the table below.
To see some of the keys described below, you may have to open all three one-touch speed
dialing panels.
1
Keys for Registering Information
Key
OK
ABC to
2
#
Space
Delete
Clear
(Stop)
1-14 Using the Menus and Operation Panel Keys
The search keys display the next or previous menu item.
Press [ ] to display the next item in the menu. If you press [ ] when the last item is
displayed, the display rotates to the first item in the menu.
Press [ ] to display the previous item in the menu. If you press [ ] when the first item
is displayed, the display rotates to the last item in the menu.
When registering names, press [ ] to immediately position the cursor under the first
letter, and press [ ] to immediately position the cursor to the right of the last letter.
Press [OK] to select the current item.
Switches the entry modes.
:A Upper Case Letter Entry mode. Enables you to enter upper case letters and
symbols.
:a Lower Case Letter Entry mode. Enables you to enter lower case letters and
symbols.
:1 Number Entry mode. Enables you to enter numbers.
WXYZ More than one letter is assigned to a key. Press [
9
then press the key containing the letter you want to enter. If the letter you want to
enter is not displayed first, press the key repeatedly until it appears. If the next letter is
under a different key, press that key to enter the first letter of the group, and press the
key repeatedly until the letter you want appears.
If the next letter is under the same key, press [ ] to move the cursor to the right one
space, then press the key again to enter the first letter of the group. Press the key
repeatedly until the letter you want appears.
The cursor keys move the cursor to the left or right.
Press [#] to enter a symbol. You can enter symbols in the Text Entry mode only. Press
[#] repeatedly until the symbol you want appears. You can enter the following
∗
symbols: - . # ! " , ; : ^ `_ = / | ' ? $ @ % & + \ ˜ ( ) [ ] { } < >
Enters a space after the letter at the cursor position, or between letters at the cursor
position. You may enter spaces in telephone numbers—they do not affect dialing.
Deletes characters at the cursor position.
Clears the entire entry if you want to erase it and start again.
After you are finished making settings or registering information, press
return to the Standby mode.
Description
] to enter the Text Entry mode,
(Stop) to