Subaddress/Password Sending With The Operation Panel Keys - Canon FAX-L2000 Facsimile Manual

3
Subaddress/Password Sending with the
Operation Panel Keys
Note the following limitations on entering the subaddress/password when you press
[Subaddress] and [Password] on the operation panel:
• If you frequently need to use a subaddress/password to send a document to more than one
location, you can register the number, subaddress and password under a one-touch speed
dialing key or a coded speed dialing code, and use Sequential Broadcasting. (See
"Sequential Broadcasting to More Than One Location", on p. 3-25.)
• You cannot press [Subaddress] or [Password] for a one-touch or coded speed dialing number
that is set for any other type of transmission but 'REGULAR TX'. (See "Setting Up One-Touch
Speed Dialing", on p. 2-9, or "Setting Up Coded Speed Dialing", on p. 2-18.)
• Setting the password is optional, but it is necessary to set the correct password if the other
party has set a password for their fax machine.
Follow this procedure to send a document with a subaddress/password entered by pressing
[Subaddress] and [Password] on the operation panel.
3-32 Sending a Document with a Subaddress/Password
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See "Adjusting
the Scan Settings", on p. 3-4.)
• You can also specify a sender's name with [TTI Selector]. (See "Selecting a Sender's
Name", on p. 3-6.)
3
Specify the destinations using the one-touch speed dialing,
coded speed dialing, access code dialing, or directory dialing
telephone numbers registered for subaddress/password
sending.
For detailed instructions, see "Using Speed Dialing", on p. 2-34, or "Using
Directory Dialing", on p. 2-42.
4
Press (Start) to start scanning immediately.
Otherwise, the machine waits five or ten seconds before it starts to scan your
documents. This timeout feature can be turned 'OFF'. (See "TX (Send)
Settings", on p. 11-13.)