Dialing Through a Switchboard
Registering the Access Type and Outside
Line Access Number Under the R Key
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching system, you have to dial the outside line
access number first, and then dial the number of the party you are calling.
You can register the access type and outside line access number under the R key so that you
only have to press this key before dialing the number you wish to reach.
Follow the procedure below to register the access type and the outside line access number
under the R key.
1
2
Data
Registration
3
OK
4
OK
Open all three one-touch speed dialing panels.
Press [Data Registration].
ADDITIONAL FUNCTIONS
1.PAPER SETTINGS
Press [ ] or [ ] until <3.FAX SETTINGS> appears
ADDITIONAL FUNCTIONS
3.FAX SETTINGS
Press [ ] or [ ] until <1.USER SETTINGS> appears
[OK].
FAX SETTINGS
1.USER SETTINGS
FAX SETTINGS
1.USER SETTINGS
USER SETTINGS
1.TEL LINE SETTINGS
Dialing Through a Switchboard
2
press [OK].
press
2-5