3
Adjusting the Scan Settings
Canon's original UHQ (Ultra High Quality) imaging technology enables you to send documents
that are very close to the quality of the original document. For best results, adjust the scan
settings for special documents before sending.
NOTE
• The light indicators on the operation panel tell you the current settings.
3-4
Setting a Document for Sending
3
Make sure the document is below the load limit marks for A4/LTR
sizes.
4
Insert the document fully into the feeder until the leading edges
of the document stops.
The following messages appear on the LCD display:
MEM IN USE
DOCUMENT READY
NOTE
• If the machine already displays <DOCUMENT READY> before you set your document,
a small-sized document, such as a STMT document, may have remained in the
automatic document feeder from a previous fax or copy job. In such a case, remove the
small-sized document from the automatic document feeder, and set your document.
(See Chapter 7, "Troubleshooting," in the Reference Guide.)
4%