8.36 Modem PCB ASSY/Modem Flat Cable
(1) Disconnect the Flat cable (CN1) from the Modem PCB ASSY.
(2) Remove the two Flat cable sponges from the Flat cable.
(3) Remove the two Flat cores from the Flat cable.
Flat cable sponge 2
(Attach it to the back side
of the terminal.)
Flat cable
<Main PCB ASSY side>
15±1 mm
68±1 mm
90±2 mm
Modem shield plate
Flat cable
Fig. 3-120
Fold up FFC along with the dotted line
Flat core (small)
Fig. 3-121
3-93
Modem PCB ASSY
CN1
Flat cable sponge 3
(Attach it to the side of the terminal.)
Flat core (large)
45°
5±1 mm
63±1 mm
167±1 mm
192±1 mm
<Modem PCB ASSY side>
16 mm
45°
28±1 mm
Terminal
side
Confidential