Brother MFC-9130CW Service Manual page 248

Assembling Note:
- When you assemble the Holder hook, make sure to insert the Hook A of the Holder hook
into the "A" of the LED ASSY first, and then assemble the Hook B of the Holder hook to
the Holder.
- After assembling, make sure to check that the Hook A is firmly engaged to the Holder.
If it is not engaged to the Holder firmly, it might cause an image failure.
"A"
(14) Remove the LED ASSY from the LED holder.
LED ASSY
LED ASSY
Hook A
Holder hook
Fig. 3-107
LED ASSY
Fig. 3-108
3-85
LED ASSY
Hook B
LED holder
Holder hook
LED
ASSY
Confidential