Flat Cable Holder Cover - Brother MFC-9130CW Service Manual

8.13 Flat Cable Holder Cover

(1) Remove the four Taptite cup S M3x8 SR screws to remove the Main shield cover plate
from the Side frame L ASSY.
Main shield cover plate
Taptite cup S
M3x8 SR
Taptite cup S M3x8 SR
(2) Remove the Screw pan (S/P washer) M3.5x6 screw to remove the Modem FG harness
from the Main body.
(3) Remove the Taptite cup S 3x8 SR screw to remove the ADF FG harness from the Main
body.
(4) Remove the Taptite cup S 3x8 SR screw to remove the Panel FG harness from the Main
body.
ADF FG harness
Modem FG harness
Panel FG harness
Screw pan (S/P washer)
M3.5x6
Taptite cup S 3x8 SR
Fig. 3-32
Main shield plate
Fig. 3-33
3-46
Side frame L ASSY
<Left side>
Screw pan (S/P washer) M3.5x6
Taptite cup S 3x8 SR
Main shield plate
Confidential