Modem Pcb Assy (Models With Fax Only) - Brother DCP-L5500D Service Manual

9.16 Modem PCB ASSY (Models with FAX only)

(1) Remove the two screw pan (S/P washer) M3.5X6 screws to remove the modem FG
harness L and the modem FG harness R. Release the modem FG harness L and the
modem FG harness R from the securing fixtures.
(2) Release the modem flat cable from the securing fixtures.
(3) Remove the two taptite bind B M4x12 screws, and remove the model shield plate from
the joint cover ASSY.
(4) Disconnect the modem flat cable from the modem PCB ASSY.
(5) Remove the screw pan (S/P washer) M3.5X6 screw to remove the modem shield cover
from the modem shield plate.
(6) Remove the two taptite cup S M3x6 SR screws to remove the modem PCB ASSY from
the modem shield plate.
Harness routing: Refer to
Modem shield cover
Taptite cup S M3x6 SR
Modem PCB ASSY
Screw pan (S/P
washer) M3.5X6
Modem FG harness R
Joint cover ASSY
"8. Speaker unit, Modem (Main PCB
Modem (LVPS
Taptite bind B M4x12
Fig. 3-72
side)".
3-74
Screw pan (S/P
washer) M3.5X6
Modem flat cable
Screw pan (S/P
washer) M3.5X6
Modem FG
harness L
Modem shield plate
side)", "9. Speaker unit,
Confidential