8.60 Paper Feed Unit
(1) Remove the Boss as bending the Lift arm in the direction of the arrow 1a to slide the Lift
arm to the direction of the arrow 1b. (The Lift arm does not have to be removed.)
Front
(2) Disconnect the wiring of the Registration front/rear/manual feed sensor harness and
Paper feed harness.
(3) Remove the four Taptite bind B M4x12 screws to remove the Paper feed unit from the
Main body.
Assembling Note:
Tighten the four Taptite bind B M4x12 screws in the order of 1 to 4.
Harness routing: Refer to
Main body
1a
Fig. 3-204
3
1
Fig. 3-205
"
Paper Feed Unit"
3-143
Paper feed unit
Boss
1b
Lift arm
Main body
4
2
Paper feed unit
Taptite bind B M4x12
Taptite bind B M4x12
<Front side>
Confidential