Brother MFC-9130CW Service Manual page 362
Color fax/mfc
Hide thumbs
Also See for MFC-9130CW:
- Basic user's manual (226 pages) ,
- Network user's manual (150 pages) ,
- Advanced user's manual (100 pages)
Table of Contents
Advertisement
(6) The message "USB Host Connect" appears on the LCD, remove the USB flash memory and
keep it in a safe place. The machine returns to the initial state of the maintenance mode.
Note:
If any of the error messages listed below appears, press the Stop key, and the
machine returns to the initial state of the maintenance mode.
Error Message
USB Mem used
Insert USB Mem
No file
USB Mem Error
Machine ID Error
Write Error
Restoration Procedure
(1) Insert the USB flash memory containing the backup data into the slot of the machine in
the initial state of the maintenance mode. The "USB Host Connect" appears on the LCD.
Note:
If the serial number of the backup data saved in the USB flash memory and the serial
number of the machine do not match, the data cannot be restored.
(2) Press the 4 and 1 keys in this order. The "Export to USB" appears on the LCD.
(3) Press the
or
"Import PI" for restoring only user setting information
"Import ALL" for restoring all backup data including machine information
(4) Press the Mono Start key. The "********.msd" appears on the LCD.
("****" shows the name of the model.)
(5) Press the Mono Start key. The "Reboot OK?" appears on the LCD.
(6) Press the Mono Start key. The message "Please wait" appears on the LCD and restore
operation of the machine data, user settings, etc. is executed.
Note:
Never remove the USB flash memory from the machine when importing is in progress.
(7) When the machine returns to the ready state and the message "Select a Function"
appears on the LCD, remove the USB flash memory and keep it in a safe place.
Note:
If any of the error messages shown in "Backup Procedure" appears, press the Stop
key to return the machine to the initial state of the maintenance mode.
The USB flash memory is being used by another operation.
No USB flash memory is inserted.
Opening a file failed.
Accessing a file in the USB flash memory failed.
Serial number does not match.
A write error occurred.
key until the desired restore method appears on the LCD.
5-24
Cause
Confidential
Advertisement
Table of Contents
Troubleshooting
