Brother MFC-9130CW Service Manual page 294

(7) Remove the Screw pan (S/P washer) M3.5x6 screw to remove the LVPS FG harness
from the Process drive unit.
Process drive unit
Screw pan (S/P washer) M3.5x6
LVPS FG harness
<Left side>
(8) Remove the two Taptite cup S M3x8 SR screws, seven Taptite bind B M4x12 screws, and
the one Taptite pan (washer) B M4x12 DA screw. Remove the Process drive unit from the
Side frame L ASSY.
<Left side>
Taptite cup S M3x8 SR
Taptite bind B M4x12
Taptite pan
(washer) B M4x12 DA
Taptite bind B M4x12
Taptite bind B M4x12
Harness routing: Refer to
Fig. 3-184
Process drive unit
Fig. 3-185
" External Temperature/Humidity Sensor PCB ASSY, Develop
Release Clutch, Registration Clutch, Paper Feed Clutch, USB Host PCB
ASSY", " Process Drive
" Back Cover Sensor Harness
3-131
Taptite cup S M3x8 SR
Unit", " Paper Feed
ASSY", " Eject Sensor PCB ASSY"
Side frame L ASSY
Unit",
Confidential