Paper Feed Clutch - Brother MFC-9130CW Service Manual

8.56 Paper Feed Clutch

(1) Disconnect the wiring of the Paper feed clutch harness.
(2) Release the Hook to remove the Paper feed clutch from the Separation roller drive joint.
Side frame L ASSY
Rotation preventing hook
Paper feed clutch
<Left side>
Assembling Note:
- When assembling the Paper feed clutch, attach the Rotation preventing hook to the Rib of
the Main body.
- Registration clutch and Paper feed clutch are both clutch parts, and they are identified
with connector colors. The connector of the Paper feed clutch is blue. Be careful not to
install an incorrect clutch.
Harness routing: Refer to
Hook
Fig. 3-188
" External Temperature/Humidity Sensor PCB ASSY,
Develop Release Clutch, Registration Clutch, Paper Feed Clutch,
USB Host PCB ASSY"
3-134
Blue connector
Rib
Separation roller
drive joint
Confidential