Figure 26 Voip Wizard: Configuration; Table 5 Voip Wizard Configuration - ZyXEL Communications MAX-200M1 Series User Manual

ZyXEL MAX-200M1 Series User's Guide

Figure 26 VOIP Wizard: Configuration

The following table describes the labels in this screen

Table 5 VOIP Wizard Configuration

LABEL
SIP Number
SIP Server Address
SIP Service Domain
User Name
Password
Check here to set up SIP2
settings.
Back
Apply
Exit
3 The ZyXEL Device attempts to register your SIP account with the SIP server.
56
DESCRIPTION
Enter your SIP number in this field (use the number or text that comes
before the @ symbol in a SIP account like 1234@VoIP-provider.com).
You can use up to 127 ASCII characters.
Type the IP address or domain name of the SIP server in this field. It
doesn't matter whether the SIP server is a proxy, redirect or register server.
You can use up to 95 ASCII characters.
Enter the SIP service domain name in this field (the domain name that
comes after the @ symbol in a SIP account like
provider.com). You can use up to 127 ASCII Extended set characters.
This is the user name for registering this SIP account with the SIP register
server. Type the user name exactly as it was given to you. You can use up
to 95 ASCII characters.
Type the password associated with the user name above. You can use up
to 95 ASCII Extended set characters.
This screen configures SIP account 1. Select the check box if you have
a second SIP account that you want to use. You will need to configure the
same fields for the second SIP account.
Click Back to return to the previous screen.
Click Apply to complete the wizard setup and save your configuration.
Click Exit to close the wizard without saving your settings.
1234@VoIP-
Chapter 5 VoIP Wizard