ZyXEL Communications MAX-200M1 Series User Manual page 38

ZyXEL MAX-200M1 Series User's Guide
Table 4 Navigation Panel Summary
LINK TAB
Phone Book Incoming Call
Policy
Speed Dial
Security
Firewall General
Services
Content Filter Filter
Schedule
Management
Static Route IP Static Route
Remote MGMT WWW
Telnet
FTP
SNMP
DNS
Security
UPnP General
Maintenance
System General
Dynamic DNS
Time Setting
Logs View Log
Log Settings
Tools Firmware
Configuration
Restart
38
FUNCTION
Use this screen to configure call-forwarding.
Use this screen to configure speed dial for SIP phone numbers that you call
often.
Use this screen to activate/deactivate the firewall and the default action to
take on network traffic going in specific directions.
Use this screen to set the days and times for your device to perform service
blocking.
Use this screen to block sites containing certain keywords in the URL,
exclude a range of users on the LAN from content filtering on your ZyXEL
Device and restrict certain web features.
Use this screen to set the days and times for your ZyXEL Device to perform
content filtering.
Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the ZyXEL Device.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the ZyXEL Device.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the ZyXEL Device.
Use this screen to configure your ZyXEL Device's settings for Simple
Network Management Protocol management.
Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the ZyXEL Device.
Use this screen to set whether or not your device will respond to pings and
probes for services that you have not made available.
Use this screen to turn UPnP on or off.
This screen contains administrative and system-related information and
also allows you to change your password.
Use this screen to set up Dynamic DNS.
Use this screen to change your ZyXEL Device's time and date.
Use this screen to display your device's logs.
Use this screen to select which logs and/or immediate alerts your device is
to record. You can also set it to e-mail the logs to you.
Use this screen to upload firmware to your device.
Use this screen to backup and restore your device's configuration (settings)
or reset the factory default settings.
This screen allows you to reboot the ZyXEL Device without turning the
power off.
Chapter 2 Introducing the Web Configurator