Navigation Panel; Table 3 Web Configurator Icons In The Title Bar; Table 4 Navigation Panel Summary - ZyXEL Communications MAX-200M1 Series User Manual

The icons have the following functions.

Table 3 Web Configurator Icons in the Title Bar

ICON

2.2.2 Navigation Panel

Use the menu items on the navigation panel to open screens to configure ZyXEL Device
features. The following table describes the menu items.

Table 4 Navigation Panel Summary

LINK TAB
Status
Network
WAN Internet
Connection
WiMAX
Frequency
Advanced
Traffic Redirect
LAN IP
DHCP Setup
Static DHCP
Client List
IP Alias
Advanced
NAT General
Port Forwarding
Trigger Port
ALG
VoIP
SIP SIP Settings
QoS
Phone Analog Phone
Common
Region
Chapter 2 Introducing the Web Configurator
DESCRIPTION
Wizards: Click this icon to go to the configuration wizards. See
49 for more information.
Logout: Click this icon to log out of the web configurator.
FUNCTION
This screen contains administrative and system-related information.
Use this screen to configure ISP parameters, WAN IP address assignment
and other advanced properties.
Use this screen to set the radio frequencies the ZyXEL Device searches for
a WiMAX connection.
Use this screen to configure DNS servers, RIP & Multicast, and Windows
networking settings.
Use this screen to configure your traffic redirect properties
Use this screen to configure LAN TCP/IP settings.
Use this screen to configure LAN DHCP and DNS settings.
Use this screen to always assign specific IP addresses to individual MAC
addresses.
Use this screen to view current DHCP client information.
Use this screen to partition your LAN interface into subnets.
Use this screen to enable Any IP
Use this screen to enable NAT.
Use this screen to make your local servers visible to the outside world.
Use this screen to set port triggering rules.
Use this screen to configure Application Level Gateway settings.
Use this screen to configure your ZyXEL Device's Voice over IP settings.
Use this screen to configure your ZyXEL Device's Quality of Service
settings for VoIP.
Use this screen to set which SIP account to use for outgoing or incoming
calls.
Use this screen to configure general phone settings.
Use this screen to select your location and call service mode.
ZyXEL MAX-200M1 Series User's Guide
Chapter 4 on page
37