Sip Screens; Sip Settings Screen; Figure 65 Voip > Sip > Sip Settings; Table 33 Voip > Sip > Sip Settings - ZyXEL Communications MAX-200M1 Series User Manual

ZyXEL MAX-200M1 Series User's Guide

10.2 SIP Screens

10.2.1 SIP Settings Screen

Use this screen to maintain basic information about each SIP account. Your VoIP service
provider (the company that lets you make phone calls over the Internet) should provide this.
You can also enable and disable each SIP account. To access this screen, click VoIP > SIP >
SIP Settings.
Figure 65 VoIP > SIP > SIP Settings
Each field is described in the following table.
Table 33 VoIP > SIP > SIP Settings
LABEL
SIP Account
SIP Settings
Active SIP
Account
Number
SIP Local Port
SIP Server
Address
114
DESCRIPTION
Select the SIP account you want to see in this screen. If you change this field, the
screen automatically refreshes.
Select this if you want the ZyXEL Device to use this account. Clear it if you do not
want the ZyXEL Device to use this account.
Enter your SIP number. In the full SIP URI, this is the part before the @ symbol.
You can use up to 127 printable ASCII characters.
Enter the ZyXEL Device's listening port number, if your VoIP service provider gave
you one. Otherwise, keep the default value.
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 95 printable ASCII characters. It does not
matter whether the SIP server is a proxy, redirect or register server.
Chapter 10 SIP