Figure 143 Red Hat 9.0: Kde: Ethernet Device: General; Figure 144 Red Hat 9.0: Kde: Network Configuration: Dns - ZyXEL Communications MAX-200M1 Series User Manual

ZyXEL MAX-200M1 Series User's Guide

Figure 143 Red Hat 9.0: KDE: Ethernet Device: General

3 Click OK to save the changes and close the Ethernet Device General screen.
4 If you know your DNS server IP address(es), click the DNS tab in the Network
Configuration screen. Enter the DNS server information in the fields provided.

Figure 144 Red Hat 9.0: KDE: Network Configuration: DNS

5 Click the Devices tab.
234
• If you have a dynamic IP address, click Automatically obtain IP
address settings with and select dhcp from the drop down list.
• If you have a static IP address, click Statically set IP Addresses and
fill in the Address, Subnet mask, and Default Gateway Address
fields.
Appendix C