Dhcp Table Screen; Figure 34 Packet Statistics; Table 10 Packet Statistics - ZyXEL Communications MAX-200M1 Series User Manual

Figure 34 Packet Statistics

The following table describes the fields in this screen.

Table 10 Packet Statistics

LABEL
Packet Statistics
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System up Time
Poll Interval(s)
Set Interval
Stop

6.6 DHCP Table Screen

This screen displays information about computers that received an IP address from the ZyXEL
Device. To access this screen, open the Status screen (see
(Details...) next to DHCP Table.
Chapter 6 Status Screens
DESCRIPTION
This column displays each interface of the ZyXEL Device.
This field indicates whether or not the ZyXEL Device is using the interface.
For the WAN interface, this field displays Up when the ZyXEL Device is
connected to a WiMAX network, and Down when the ZyXEL Device is not
connected to a WiMAX network.
For the LAN interface, this field displays Up when the ZyXEL Device is using the
interface and Down when the ZyXEL Device is not using the interface.
This field displays the number of packets transmitted on this interface.
This field displays the number of packets received on this interface.
This field displays the number of collisions on this port.
This field displays the number of bytes transmitted in the last second.
This field displays the number of bytes received in the last second.
This field displays the elapsed time this interface has been connected.
This is the elapsed time the system has been on.
Type the time interval for the browser to refresh system statistics.
Click this button to apply the new poll interval you entered in the Poll Interval
field above.
Click this button to halt the refreshing of the system statistics.
ZyXEL MAX-200M1 Series User's Guide
Section 6.1 on page 59), and click
67