Figure 106 Management > Upnp; Table 57 Management > Upnp - ZyXEL Communications MAX-200M1 Series User Manual

Figure 106 Management > UPnP
Each field is described in the following table.
Table 57 Management > UPnP
LABEL
Device Name
Enable the
Universal Plug and
Play (UPnP)
Feature
Allow users to
make
configuration
changes through
UPnP
Allow UPnP to
pass through
Firewall
Apply
Cancel
Chapter 17 UPnP
DESCRIPTION
This field identifies your device in UPnP applications.
Select this to activate UPnP. Be aware that anyone could use a UPnP application
to open the web configurator's login screen without entering the ZyXEL Device's IP
address. You still have to enter the password, however.
Select this to allow UPnP-enabled applications to automatically configure the
ZyXEL Device so that they can communicate through the ZyXEL Device. For
example, using NAT traversal, UPnP applications automatically reserve a NAT
forwarding port in order to communicate with another UPnP enabled device; this
eliminates the need to manually configure port forwarding for the UPnP enabled
application.
Select this to allow traffic from UPnP-enabled applications to bypass the firewall.
Clear this if you want the firewall to check UPnP application packets (for example,
MSN packets).
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its default value.
ZyXEL MAX-200M1 Series User's Guide
175