Table 68 Cdr Logs; Table 69 Ppp Logs; Table 70 Upnp Logs - ZyXEL Communications MAX-200M1 Series User Manual

Table 67 ICMP Logs (continued)
LOG MESSAGE
Unsupported/out-of-order ICMP:
ICMP
Router reply ICMP packet: ICMP

Table 68 CDR Logs

LOG MESSAGE
board %d line %d channel %d,
call %d, %s C01 Outgoing Call
dev=%x ch=%x %s
board %d line %d channel %d,
call %d, %s C02 OutCall
Connected %d %s
board %d line %d channel %d,
call %d, %s C02 Call
Terminated

Table 69 PPP Logs

LOG MESSAGE
ppp:LCP Starting
ppp:LCP Opening
ppp:CHAP Opening
ppp:IPCP Starting The PPP connection's Internet Protocol Control Protocol stage is starting.
ppp:IPCP Opening
ppp:LCP Closing
ppp:IPCP Closing

Table 70 UPnP Logs

LOG MESSAGE
UPnP pass through Firewall
Chapter 18 Logs
DESCRIPTION
The firewall does not support this kind of ICMP packets or
the ICMP packets are out of order.
The router sent an ICMP reply packet to the sender.
DESCRIPTION
The router received the setup requirements for a call. "call" is
the reference (count) number of the call. "dev" is the device
type (3 is for dial-up, 6 is for PPPoE). "channel" or "ch" is the
call channel ID.For example, "board 0 line 0 channel 0, call 3,
C01 Outgoing Call dev=6 ch=0 "Means the router has dialed
to the PPPoE server 3 times.
The PPPoE or dial-up call is connected.
The PPPoE or dial-up call was disconnected.
DESCRIPTION
The PPP connection's Link Control Protocol stage has started.
The PPP connection's Link Control Protocol stage is opening.
The PPP connection's Challenge Handshake Authentication Protocol stage is
opening.
The PPP connection's Internet Protocol Control Protocol stage is opening.
The PPP connection's Link Control Protocol stage is closing.
The PPP connection's Internet Protocol Control Protocol stage is closing.
DESCRIPTION
UPnP packets can pass through the firewall.
ZyXEL MAX-200M1 Series User's Guide
185