2GN/2GP/2GR-1
Output an own-status report (maintenance item U000).
1. Enter 000 using the numeric keys and press the start key.
2. Select MAINTENANCE and press the start key to output a list of the current settings of the maintenance items.
3. Press the stop key.
Exit maintenance mode.
1. Enter 001 using the numeric keys and press the start key. The machine exits the maintenance mode.
Print out the user setting list.
1. Select [Report Print] to output the user various setting reports.
Make test copies.
1. Place an original and make test copies.
Attaching the language label (230 V specifications only).
1. According to need, attach the correspond language label.
Completion of the machine installation.
(2) Setting initial copy modes
Factory settings are as follows:
Maintenance
item No.
U253
Switching between double and single counts
U260
Selecting the timing for copy counting
U285
Setting service status page
U326
Setting the black line cleaning indication
U328
Side ejection setting
U342
Setting the ejection restriction
U343
Switching between duplex/simplex copy mode
1-2-10
Contents
Factory setting
Double count
After ejection
ON
ON
OFF
ON
OFF