Detaching And Refitting The Isu (Reference) - Kyocera KM-3050 Service Manual

(3) Detaching and refitting the ISU (reference)

Follow the procedure below to replace the ISU.
Fitting requires the following tools
Two positions pins (P/N 1856812)
Procedure
Detaching the ISU
1. Remove the platen (see page 1-5-12).
2. Remove seven screws and then remove the
ISU cover.
3. Remove three screws and two connectors,
and then remove the ISU.
4. Replace the ISU.
ISU cover
Figure 1-5-39
Connector
Connector
ISU
Figure 1-5-40
2GN/2GP/2GR
1-5-19