Setting The Fax Backup Kit; Method: Restoring The Backup Data When Replacing The Hdd; Method: When Call For Service C0700 Occurred - Kyocera KM-3050 Service Manual

Maintenance
item No.

Setting the fax backup kit

U933
Description
Initializes optional fax backup kit (CF) and restore the backup data.
Purpose
To initialize the CF when call for service (C0700) occurs. Also, to restore data when the hard disk has been
damaged.
Method
1. Press the start key.
2. Select the item.
Display
INITIALIZE CF
FAX IMAGE
JOB ACCOUNTING
RECOVERY CF

Method: Restoring the backup data when replacing the HDD

1. Select [FAX IMAGE].
2. Press [EXECUTE].
3. Press the start key. The fax reception data is printed out.
4. Select [JOB ACCOUNTING].
5. Press the start key. The job accounting data is restored.
6. Select [INITIALIZE CF].
7. Press the start key. CF is initialized.
8. Turn the main power switch off and on.

Method: When call for service C0700 occurred

1. Select [RECOVERY CF].
2. Press the start key.
3. Turn the main power switch off and on.
4. Select [FAX IMAGE].
5. Press [EXECUTE].
6. Press the start key. Prints the fax images if the images remain in the CF.
7. Select [INITIALIZE CF].
8. Press the start key. CF is initialized.
9. Turn the main power switch off and on.
Caution
For the firmware which have a version earlier than below, perform only steps 7 through 9 since
RECOVERY CF is unsupported.
Software
MAIN
MMI
Engine
Engine Boot
SCANNER
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Initializes the fax backup kit (CF) and backs up the job accounting
data in the hard disk into the fax backup kit (CF).
Prints the fax reception data backed up in the fax backup kit (CF).
Restores the job accounting data stored in the fax backup kit (CF) to
the hard disk.
Rewrites the serial number of CF to put it in active when the call for
service CO700 occurs.
Version
2GR_2000.006.100
2GR_7000.005.009
2GR_1000.003.001
2GR_1100.001.007
2GR_1200.003.001
2GN/2GP/2GR-7
1-3-85