Printer Settings; Selection Of Emulation; Setting Of Alternative Emulation; Maximum Number Of Repeat Copy Jobs - Kyocera KM-3050 Service Manual

Maximum number of repeat copy jobs

Change the maximum number of Repeat Copy jobs to
retain in the document box.
1. Press [Next] of Job Box.
2. Press [Change] of Repeat Copy Job Retention.
3. Enter the number using the [+]/[-].
Setting range: 0 to 50
4. Press [OK].

(6) Printer settings

Emulation

Selection of emulation

Select the emulation for operating this machine by the
command for other printers.
1. Press [Change] of Emulation and then the key of
emulation.
Line Printer/IBM Proprinter/DIABLO 630/
EPSON LQ-850/PCL 6/KPDL/KPDL (Auto)/KC-GL
2. Press [OK].
3. Press the power key, and after confirming that the
power key/indicator and memory indicator have
turned off, turn the main power switch off and on.

Setting of alternative emulation

When you have selected [KPDL (Auto)] as emulation
mode, you can switch KPDL and another emulation
mode (alternative emulation) automatically according to
the data to print.
1. Press [Change] of Emulation, [KPDL (Auto)], [Alt
Emulation] and then the key of alternative emula-
tion.
Line Printer/IBM Proprinter/DIABLO 630/EPSON
LQ-850/PCL 6/KC-GL
Initial setting: PCL 6
2. Press [OK].
3. Press the power key, and after confirming that the
power key/indicator and memory indicator have
turned off, turn the main power switch off and on.
Setting of KPDL error report
When an error has occurred during printing in KPDL
emulation mode, set whether or not the error report is
output.
1. Press [Change] of Emulation, [KPDL] or [KPDL
(Auto)], [KPDL Error Report] and then [On] or [Off].
Initial setting: Off
2. Press [OK].
3. Press the power key, and after confirming that the
power key/indicator and memory indicator have
turned off, turn the main power switch off and on.
Setting of page size and pen
When you have selected KC-GL as emulation mode, you
can set the page size, eight kinds of pens, and thickness
of each pen.
1. Press [Change] of Emulation, [KC-GL], [Page Set]
and then the key of print size.
B0/B1/B2/B3/A0/A1/A2/Special Size
Initial setting: Special Size
2. Press [OK].
3. Press [Pen Adjust], [Change] of the pen to change
its thickness (1 to 8), and then [+]/[-] to set the thick-
ness of pen (dots).
Setting range: 1 to 99
4. Press [OK].
5. Press the power key, and after confirming that the
power key/indicator and memory indicator have
turned off, turn the main power switch off and on.
2GN/2GP/2GR-7
1-3-97