Table of Contents
Advertisement
c.
Align the holes on the inner slide with the holes on sides of the computer;
then, attach the slide with three pan-head short screws.
Preparing the rack enclosure
Parts needed:
•
Two slide bracket assemblies
•
Two slide rails (fitted to system unit)
•
One cable-management arm
•
Ten long screws
•
Ten cage nuts
•
Installation template
Attention: To ensure cabinet stability, install computers in the rack enclosure starting
from the bottom.
Attention: This procedure requires two people.
To attach the mounting hardware to the rack enclosure:
1.
Mark the positions of the slide brackets on the mounting rails on the rack
enclosure:
a.
Position the template on the front mounting rail on the rack enclosure,
aligning the holes. Secure the template in place with tape.
b. Mark the holes for the slide brackets and cage nuts.
37
FRU replacements
Advertisement
Chapters
Table of Contents
