Rack Mount Configuration; Preparing The Computer For Installation - IBM IntelliStation 6866 Hardware Maintenance Manual

Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
If the voltages are not correct, and the power cord is good, replace the power supply.

Rack mount configuration

To configure the Type 6866 in a rack mount there are three major steps:
1. Preparing the computer for installation in a rack enclosure.
2. Preparing the rack enclosure.
3. Installing the computer into the rack enclosure.

Preparing the computer for installation

Parts needed:
• Part number 10L7006, Netfinity Tower-Rack Conversion Kit
• Two 3.5 mm flange nuts which are provided in a plastic bag taped inside the CD-
ROM drive cover
• The inner slide from two slide bracket assemblies
• 6 pan-head short screws
Attention: To avoid damage to internal components, use only the pan-head short
screws included with the rack mount kit.
Signal
3.3 V
3.3 V
COM
5 V
COM
5 V
COM
POK
5VSB
12 V
3.3 V
- 12 V
COM
PS-ON
COM
COM
COM
- 5 V
5 V
5 V
Function
+3.3 V dc
+3.3 V dc
Ground
+5 V dc
Ground
+5 V dc
Ground
Power Good
Standby voltage
+12 V dc
+3.3 V dc
- 12 V dc
Ground
DC Remote Enable
Ground
Ground
Ground
- 5 V dc
+5 V dc
+5 V dc
FRU replacements
35