Chapter 3. Diagnostics
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Asset ID™ test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setup Utility program
Attention:
A customized setup configuration (other than default settings) might exist on the computer you are servicing. Running
the Setup Utility program might alter those settings. Note the current configuration settings and verify that the settings
are in place when service is complete.
© Copyright IBM Corp. 2000
The following tools are available to help identify and resolve hardware-related
problems.
•
Setup Utility program
•
Power-On Self-Test (POST)
- POST Beep Codes
- Error Code Format
•
Diagnostics program
•
Recovery utility
- Full recovery
- Partial recovery
•
Repair utility
The Setup Utility (configuration) program is stored in the permanent memory of the
computer. This program includes settings for the following:
•
System Summary
•
Product Data
•
Devices and I/O Ports
•
Start Options
•
Date and Time
•
System Security
•
Advanced Setup
•
ISA Legacy Resource
•
Power Management
To run the Setup Utility program, use the following procedure.
Test results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5