Table of Contents
Advertisement
Diagnostic Error Code
014-2XX-XXX
014-3XX-XXX Parallel port failure
015-000-XXX USB port Interface Test Passed
015-001-XXX USB port Presence
015-002-XXX USB port Timeout
015-015-XXX USB port External Loopback failure
015-027-XXX USB port Configuration/Setup error
015-032-XXX USB port Device Controller failure
015-034-XXX USB port buffer allocation failure
015-035-XXX USB port Reset condition detected
015-036-XXX USB port Register error
015-040-XXX USB port IRQ failure
015-195-XXX USB port Test aborted by user
015-196-XXX USB port test halt, error threshold exceeded
015-197-XXX USB port test warning
015-198-XXX USB port test aborted
015-199-XXX USB port test failed, cause unknown
018-000-XXX PCI Card Test Passed
FRU/Action
1.
External parallel device
2.
System board
1.
No action
1.
Remove USB device(s) and re-test
2.
System board
1.
Remove USB device(s) and re-test
2.
System board
1.
Remove USB device(s) and re-test
2.
System board
1.
Flash the system
2.
System board
1.
System board
1.
Reboot the system
2.
Flash the system
3.
Run memory test
4.
System board
1.
Remove USB device(s) and re-test
2.
System board
1.
System board
1.
Run setup and check for conflicts
2.
Flash the system
3.
System board
1.
Information
2.
Re-start the test, if necessary
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
1.
Make sure the component that is called out is
connected and/or enabled
2.
Re-run test
3.
Component that is called out in warning statement
4.
Component under test
1.
If a component is called out, make sure it is
connected and/or enabled
2.
Flash the system and re-test
3.
Go to the "Undetermined problems" section
1.
Go to the "Undetermined problems" section
2.
Flash the system and re-test
3.
Replace component under function test
1.
No action
55
Symptom-to-FRU index
Advertisement
Chapters
Table of Contents
