Display Missing Disk Units; Display Missing Disk Units (No Mirrored Protection); Display Missing Disk Units (Restore Data Not Complete); Display Missing Disk Units (Vpd Not Correct) - IBM Application System/400 Service Information

Display Missing Disk Units (All Devices
on One
va
Processor Failing:
If you see
the display shown in Figure 3-11 on page 3-33
(showing all the disk units attached to the mag-
netic storage 1/0 processor at address 0010
failing), you cannot determine the failing item.
Perform the following:
1. Exchange the magnetic storage 1/0 processor.
Display Missing Disk Units
The following disk units are missing from the system disk
confi gurati on:
Serial
ASP Unit Type Model Nuriler Address Reference Code
1 2 610Z eOl5 10-IZ345 fleI0-0100FFFF 1400
)= =3= 61BZ flel5 10-IZ346= OOIO-OZOoFFH 1400
More. ,.
Press Enter to use Dedicated Service Tools (DST).
Fl1=Display unit status
Figure 3-11. Display Missing Disk Units (All Devices
on One I/O Processor Failing)
2. If this does not correct the problem, exchange
the disk units.
Display Disk Configuration Status
Serial
ASP Unit Number Type Model
1 ] 16-12345 6102 0015
-C
-1- Hl-12347~ 6102 e~n5
-1- -2; 10-23456- 6H12 eElIS
=(
=2_ 10-23458= 6102 ee2e
Press Enter to continue.
Address
001O-B1IIBFFFF
0010-03OOFFFF
OOIO-OZOOFFFF
e010-0400FFFF
Status
Active
A c t i v e - - -
Suspen-ded--
Act1ve--==
More •••
F3=£Xit FS'"Refresh Fl]:Displ.y non-configured units Fl2=Cancel
Figure 3-12. Display Disk Configuration Status
Display Missing Disk Units (No Mir-
rored Protection):
If you see the display
shown in Figure 3-13, the disk units shown do not
have mirrored protection. You must repair the
disk units shown before the IPL can continue.
Display Missing Disk Units
The following disk units are missing from the system disk
configuration:
Serial
ASP Unit Type Model Nllllber Address Reference Code
1 2 6102 9015 10-12345 0919-010f}FFFF l02E
-C
-3- 6102 0015 10-IZ346= OOIO-OZOOFHF 10ZE
Press Enter to use Dedicated Service Tools (OST).
Fll:Display unit status
More •••
Figure 3-13. Display Missing Disk Units (No Mirrored
Protection)
Display Missing Disk Units (Restore
Data Not Complete):
If you see the display
shown in Figure 3-14, a disk data restore opera-
tion or a restore storage operation is not complete
for the disk drives shown. You must complete the
disk data restore or the restore storage before the
IPL can continue.
Display Missing Disk Units
A
restore of
the data on one or more units has not completed.
The following disk units have incemplete data:
Serial
ASP Unit Type Model Humber Address Status
_1 __ 3_ 6192 ee15 18-12345_ OElIO-0300FFFF Unprotected
- - - M o r e ...
Press Enter to use Dedicated Service Tools (CST).
Figure 3-14. Display Missing Disk Units (Restore Data
Not Complete)
Display Missing Disk Units (VPD Not
Correct):
If you see the display shown in
Figure 3-15 on page 3-34, the vital product data
for the disk drives shown is not correct. Use the
Address field to find the failing disk unit. Use the
Work with vital product data (VPD) option on the
Work with Disk Unit Information display under
Work with Disk Units to correct the vital product
Chapter 3. Problem Isolation Procedures
3-33