Isis
®
Electrical Installation (cont.)
28
Mounting the wall controller
WARNING: Disconnect power to the wall box before wiring the fan controller.
Mount the fan controller so that the fan it controls is visible from the controller location. Install the controller on a flat surface that is
readily accessible, free from vibration, and where there is adequate distance from foreign objects or moving equipment.
After wiring the controller (see previous page), mount the controller with two (2) screws. Make sure the controller is oriented as shown
below. Do not overtighten the screws. Snap the wallplate to the controller.
Controller
Wallplate
WWW.BIGASSFANS.COM
©2011 DELTA T CORP.
DBA BIG ASS FAN CO.
ALL RIGHTS RESERVED