Mounting methods vary by mounting structure. See the appropriate Mounting Method section for specialized installation instructions.
Note: Drawings below are not to scale.
Extension Tube Hardware:
(2) 3/8-16 x 3-1/2" Socket Head Cap
Screw
(4) 3/8" Flat Washer
(2) 3/8" Nylock Nut
Extension Tube &
1
Safety Cable
Wall Controller
Wall Controller
1. The safety cable is attached to extension tube with a 3/8" bolt and nut.
2. Optional. The Wood Frame Mounting kit is only included if ordered.
3. If installing the fan on a typical lighting circuit with one basic light switch, the Limited Access Controller must be installed.
4. Airfoils can be purchased with winglets (standard) or airfoil tips (optional). If you purchased the Isis with airfoil tips, they will arrive already installed in
the airfoils. Winglets are installed on the airfoils during Airfoil Installation.