Using Redial - Kyocera ECOSYS M3540idn Operation Manual

Sending Faxes > Basic transmission procedure

Using redial

Redial is a function allowing you to dial the last entered number once again.
Use this when the receiving system does not respond when you have tried to send a fax. When you want to send the fax
to the same receiving system, press [Recall], and you can call the receiving system you dialed on the destination list.
1
2
Press [Recall].
Ready to send.
FAX
On Hook Chain Direct
Recall
Address Book Ext Address Book
Functions
Press the [Start] key.
The transmission will start.
NOTE
Recall information is canceled in the following conditions.
• When you turn the power off
• When you send a next fax (new recall information is registered)
• When you log out
10:10
Dest. :
Check
Add Dest.
One Touch Key
Favorites
3-7