Konica Minolta Bizhub C300 Copy Manual page 546

Utility
!
Detail
For the procedure on adjusting the printer, refer to "Adjusting the printer"
on page 12-50.
For the procedure on adjusting the finisher, refer to "Adjusting the finish-
er" on page 12-58.
For the procedure on adjusting the color registration, refer to "Adjusting
the color registration for yellow, magenta and cyan" on page 12-66.
For the procedure on adjusting the gradation levels, refer to "Adjusting
the gradation levels" on page 12-69.
For details on displaying [Erase Leading Edge], contact your technical
representative.
For details on displaying [Scanner Adjustment] and [ADF Adjustment],
contact your technical representative.
List/Counter
Parameter
Management List
Paper Size/Type Counter
Reset Setting
Parameter
System Auto Reset
Auto Reset
C300
Job Settings List
Description
Specify the desired length of time until
the automatic system reset operation is
performed.
• Priority Mode:
Select the setting ("Copy", "Scan" or
"Fax") for the mode that the machine
enters when the automatic system re-
set operation is performed.
• System Auto Reset Time:
Specify the setting (between 1 and 9
minutes or "OFF") for the desired
length of time until the automatic sys-
tem reset operation is performed.
Select the setting (between 1 and 9 min-
utes or "OFF") for the desired length of
time until the automatic panel reset op-
eration is performed for each mode
(Copy, Scan and Fax).
Description
The machine settings can be printed.
Store combinations of paper sizes and paper
types to be counted.
Default Setting
Priority mode:
Copy
System Auto Reset
Time:
1 minute
Copy: 1 minute
Scan: 1 minute
Fax: 1 minute
12
12-33