Konica Minolta Bizhub C300 Copy Manual page 221

4
– The number under "Number of Pages" in the screen that appeared
when a sample copy is printed indicates the number of copies that
are sample copies/the number of pages in the sample copy.
6
In the Change Setting screen, change the copy settings as desired, and
then touch [OK].
– To cancel changes to the settings, touch [Cancel Change].
– To stop copying while the Change Setting screen is displayed, se-
lect the proof copy job to be stopped from the list of jobs on the left
side of the touch panel, and then touch [Delete]. In the screen that
appears, requesting confirmation to delete the copy program,
touch [Yes].
– To cancel changes to the settings in the Change Setting screen,
press the [Reset] key while the Change Setting screen is displayed
to reset the settings to those specified in step 2.
– The number under "# of Sets" in the Change Setting screen is the
number of copies that will be printed when [Print] is touched.
Why is the button for the setting that I wish to change not dis-
?
played?
The copy setting cannot be changed.
% If the copy settings cannot be changed, stop printing the proof
copy. Then, press the [Reset] key to cancel the copy settings, and
then specify the desired settings.
4-6
Additional copy operations
C300