Emptying The Waste Containers - Konica Minolta Bizhub C300 Copy Manual

Replacing toner cartridges and staples and emptying waste containers
9
9.4

Emptying the waste containers

If the hole-punch waste container in punch kit installed on finisher becomes
full, the message shown below appears (if it can be emptied by the user).
Note
The setting for emptying the hole-punch waste container should be spec-
ified by the technical representative. For details, contact the technical
representative.
The default setting is "Service". If a message appears, immediately con-
tact the technical representative.
Display for the punch dust box setting
9-26 C300