8
–
If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
–
To also specify settings for Application functions "Cover Mode",
"Insert Sheet" and "Chapters", touch [Insert Sheet Setting], and
then select the settings for the pages to be printed.
–
Blank pages inserted using the "Cover Mode", "Insert Sheet" and
"Chapters" functions are only counted, but page numbers are not
printed on them.
–
If "Except for Front Cover" or "Do Not Print Page #" is selected un-
der "Cover Mode", page numbers are printed starting with "2" in
single-sided copies and starting with "3" in double-sided copies.
–
If "Do Not Print Page #" is selected, inserted pages are only count-
ed, but page numbers are not printed on them. If "Skip the page(s)"
is selected, inserted pages are not counted and page numbers are
not printed on them.
?
What are the limits on the adjustment amount?
% The print position can be finely adjusted in 1/16 inch increments.
Can no adjustment be made?
?
% To make no left/right or up/down adjustments, touch [No Adj.].
7
Touch [OK], and then touch [OK] in the next screen that appears.
The Stamp screen appears again.
8-74
Application functions
C300