Copier Setting - Konica Minolta Bizhub C300 Copy Manual

12

Copier setting

Parameter
Auto Paper Select for
Small Original
Auto Booklet ON when
Fold & Staple
Auto Zoom for Combine/
Booklet
Sort/Group Auto Change
12-22
Description
Select whether copying is permitted
when the "Auto Paper Select" setting is
selected and either no original is placed
on the original glass or the original
placed on the original glass is too small
for its size to be detected.
• Copy on Small Size:
The original size is determined to be
5-1/2 × 8-1/2, and copies are pro-
duced on 5-1/2 × 8-1/2-size paper.
• Copy on Letter:
The original size is determined to be
8-1/2 × 11, and copies are produced
on 8-1/2 × 11-size paper.
• Prohibit Copy:
Copies cannot be produced since the
original size cannot be detected. Be-
fore pressing the [Start] key, the paper
tray (paper to be printed on) must be
selected.
Select whether or not the "Booklet"
function is selected automatically when
the "Fold & Staple" setting is selected.
This parameter is available only if option-
al saddle stitcher is installed.
Select whether or not the preset zoom
ratios are automatically selected when
"Auto Paper Select" is set and a Com-
bine Originals or Booklet setting is se-
lected.
• Auto Display Zoom Ratio:
The following zoom ratios are set.
2 in 1, Booklet × 0.647
4 in 1 × 0.500
8 in 1 × 0.323
• OFF:
No zoom ratio is selected automati-
cally.
Select whether or not the "Sort" setting
is automatically selected when 2 or more
copies are set to be printed in a single
job.
• ON:
When an original is loaded into the
ADF and the [Start] key is pressed, the
"Group" setting is automatically se-
lected if the original consists of only
one page or the "Sort" setting is auto-
matically selected if the original con-
sists of two or more pages.
• OFF:
The "Sort" and "Group" settings are
not selected automatically.
Utility
Default Setting
Prohibit Copy
Auto Select Booklet
Auto Display Zoom Ratio
ON
C300