Application functions
Checking the Print Result of the Adjust Color Settings (Sample Copy)
You can make a sample copy of your original to see how it will appear with
the currently specified color adjustment settings.
As an example, the procedure for the Brightness parameter is described be-
low.
!
Detail
For details on displaying the screen for each Adjust Color parameter, re-
fer to "Adjusting the copy color quality (Adjust Color parameters)" on
page 8-54.
Note
[Sample Copy] does not appear in the Color Balance screen.
When the Sample Copy screen is displayed, no key other than [Reset] or
[Start] can be used.
Place the original on the original glass with the image to be checked po-
sitioned within the sample area. The sample copy will be printed even if
the edges of the original extend off the original glass.
C300
8
8-57