Daylight Saving Time Setting; Weekly Timer Setting - Konica Minolta Bizhub C300 Copy Manual

12
Parameter
Offset by Each Job Set-
ting
Reminder
The "Output Tray Setting" parameter is available only if optional Output
Tray is installed.
Date/Time Setting
Description
Specify the current date and time. In addition, the time zone can be
set between -12:00 and 13:00 (in 30-minute increments).

Daylight Saving Time Setting

Description
Select whether or not the machine's internal clock observes daylight
saving time.
If "ON" is selected, a setting appears so that the length of time for
adjusting the current time can be set. The daylight saving time can
be set between 1 and 150 minutes in 1-minute increments.

Weekly Timer Setting

Parameter
Weekly Timer ON/OFF
Setting
Time Setting
Date Setting
Select Time for Power
Save
Password for Non-Busi-
ness Hours
12-28
Description
Select whether or not printed copies are
fed out shifted when "Offset" is selected
while a finisher is installed.
ON:
Pages are fed out shifted.
OFF:
Pages are fed out without being shifted.
Description
Select whether or not the weekly timer
function is used.
Specify the time of each day that the ma-
chine is turned on/off.
Specify the individual dates or the days
of the week that the machine is turned
on/off.
If the machine is turned off at a specific
time, for example, during the lunch
break, the time for turning the machine
off and on can be specified.
If the machine is turned off with the
weekly timer function, select whether or
not use is limited with a password. In ad-
dition, if "ON" is selected, specify the
password that must be entered.
Utility
Default Setting
ON
Default Setting
Time Zone: +00:00
Default Setting
OFF
Default Setting
OFF
–
–
OFF
OFF
C300