Extension - Co Call Limitation—For Incoming Call; Co - Co Call Limitation—After Conference - Panasonic KX-NCP500 Programming Manual

4.18 [2-9] System Options
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
15.1.1 Redial, Last Number
Extension - CO Call Limitation—For Incoming Call
Selects whether the time limit for extension-to-CO line calls applies to outgoing calls only or for both outgoing
and incoming calls. COS determines the use of this feature, and the length of the time limit can be assigned
on a trunk group basis.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
4.12 [2-7-1] Class of Service—COS Settings—CO & SMDR—
5.1 [3-1-1] Trunk Group—TRG Settings—Main—
Feature Manual References
3.1.17 CO Line Call Limitation
CO - CO Call Limitation—After Conference
Selects whether to allow a call between 2 outside destinations to continue after the originator of the conference
has left the conference.
Default
Enable
Value Range
Enable: The call will be disconnected.
Disable: The call will continue.
474 PC Programming Manual
Extension-CO Line Call Duration Limit
Extension-CO Duration Time (*60s)
Document Version 2011-10