Panasonic KX-NCP500 Programming Manual page 747

Feature Manual References
13.1.17 Private Network Features—NDSS (Network Direct Station Selection)
Optional Parameter (Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Default
1
Value Range
For KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200:
1–8
For KX-TDE600:
1–32
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
4.6 [2-4] Week Table
Feature Manual References
17.1.5 Time Service
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO,
Group CO, G-DN, SDN)
Specifies the ring tone type.
Default
1
Value Range
KX-DT300 series (except KX-DT321)/KX-T7600 series/IP-PT (except KX-NT265/KX-NT321): 1–30
KX-DT321/KX-NT265/KX-NT321: 1–8 (Even if ring tone 9–30 is selected, ring tone 1 is heard.)
Other telephones: 1–8 (Even if ring tone 9–30 is selected, ring tone 2 is heard.)
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
None
Document Version 2011-10
6.18 [4-3] DSS Console
PC Programming Manual 747