Utility-File Transfer Ftp To Ip Equipment-Ip-Cs/Nt400; Utility-File Transfer Ftp To Ip Equipment-Nt3Xx - Panasonic KX-NCP500 Programming Manual

2.6.20 Utility—File Transfer FTP to IP Equipment—NT3xx
•
Click Close to return to the Ping screen.
2.6.19 Utility—File Transfer FTP to IP Equipment—IP-CS/NT400
Displays a list of files on the FTP server, and allows you to update the programs stored in IP-CSs and
KX-NT400 IP-PTs.
This option is only available at Installer level.
It is possible to perform the update in 2 ways:
•
Manual update
•
Timed (automatic) update
To update manually:
1.
From the Utility menu, select File Transfer FTP to IP Equipment, and then either IP-CS or NT400.
2.
Input the FTP Server Address and File Name.
3.
Put a check in the Select check boxes of the items to be updated.
4.
Click Execute.
To set timed update:
1.
From the Utility menu, select File Transfer FTP to IP Equipment, and then either IP-CS or NT400.
2.
Input the FTP Server Address and File Name.
3.
Put a check in the Select check boxes of the items to be updated.
4.
Click Timed Update.
The Timed Update screen appears. For information on setting this screen, see 2.6.21 Utility—Card
Software Timed Update.
Note
•
Cards are automatically set to OUS status during an update, and returned to INS status when the
update is complete.
•
To display the file version of the file stored on the FTP server, click Load.
•
To refresh the status of all ports, click Refresh.
•
Timed updates can only be set for either LPR cards, IP-CSs, or KX-NT400 IP-PTs. They cannot be set
for more than one type of device.
2.6.20 Utility—File Transfer FTP to IP Equipment—NT3xx
Displays a list of files on the FTP server, and allows you to update the programs stored in KX-NT300 series
IP-PTs.
This option is only available at Installer level.
To perform an update
1.
From the Utility menu, select File Transfer FTP to IP Equipment, and then NT3xx.
2.
Input the FTP Server Address and File Name.
3.
Click Execute.
Note
•
This utility is not available when the PBX is connected to the Maintenance Console via a LAN
connection.
•
Ports cannot be selected. All registered ports that are in OUS status will be activated, and then reset
when the update is complete.
•
To display the version and file type of the file stored on the FTP server, click Load.
•
FTP server passwords and user IDs can only contain capital letters and numbers.
64 PC Programming Manual Document Version 2011-10