Panasonic KX-NCP500 Programming Manual page 486

4.18 [2-9] System Options
Enable: The CLIP number of the calling extension is sent.
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
3.1.15 CLIP (Calling Line Identification Presentation)
9.1.4 ICD Group Features—Outside Destinations
13.1.18 Private Network Features—Network ICD Group
System Wireless—Out of Range Registration
Selects whether the PBX can set the status of a PS to Out of Range if no signal is received from the PS for a
preset length of time. This feature must be enabled to allow PS roaming.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
4.5 [2-3] Timers & Counters—
Feature Manual References
13.1.19 Private Network Features—PS Roaming by Network ICD Group
System Wireless—SDN Delayed Ringing with LCD
Selects whether call information (such as Caller ID) is shown on the display of a PDN extension PS (i.e., a PS
with one or more PDN buttons) when a call is received while delayed ringing is set.
Default
Disable
Value Range
Disable, Enable
486 PC Programming Manual
System Wireless—PS Out of Range Timer
Document Version 2011-10