Co Line Call Limitation - Panasonic KX-NS1000 Feature Manual

4.1.17 CO Line Call Limitation

•
It is possible to identify the CO line port that has a CO line connected to it. This prevents extension users
from originating a call to a CO line which is not connected.
PC Programming Manual References
9.23 PBX Configuration—[1-1] Configuration—Slot—SLC2 - Port Property—
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port—
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→ Idle Line Access (Local Access)
→ Trunk Group Access
→ Single CO Line Access
10.7.2 PBX Configuration—[2-7-2] System—Class of Service—External Call Block
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main—
11.1.2 PBX Configuration—[3-1-2] Group—Trunk Group—Local Access Priority
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for Single CO)
→ Parameter Selection (for Group CO)
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
→ Type
→ Parameter Selection (for Single CO)
→ Parameter Selection (for Group CO)
16.1 PBX Configuration—[8-1] ARS—System Setting—
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings—
Feature Manual References
4.1.22 COS (Class of Service)
7.1.3 Flexible Buttons
Operating Manual References
1.2.1 Making Calls
4.1.17 CO Line Call Limitation
Description
CO line calls are limited by the following features:
Feature
Extension-to-CO Line Call
Duration
78 Feature Manual
ARS Mode
If a call between an extension user and an outside party is
established, the call duration can be restricted by the system timer
selected for each trunk group. Both parties will hear warning tones at
five-second intervals starting 15 seconds before the time limit.
the time limit expires, the line will be disconnected. COS
programming determines whether this feature is enabled or disabled.
Whether this feature applies to outgoing calls only, or to both outgoing
and incoming calls is determined through system programming.
Connection
Connection
Connection
Line Hunting Order
CO Name
Description
Document Version 2016-03
When
*1