Panasonic KX-NCP500 Programming Manual page 369

Automatic Redial—Analog CO Mute / Busy Detection Timer
Specifies the length of time before the PBX stops muting the caller's voice and cancels busy tone detection
when Automatic Redial to analog CO line is performed.
Default
8 s
Value Range
0–15 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
15.1.1 Redial, Last Number
Dial—Hot Line (Pickup Dial) Start
Specifies the length of time between going off-hook and the start of automatic dialing when the Hot Line feature
is set.
Default
1 s
Value Range
0–15 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
8.1.6 Hot Line
Dial—Extension First Digit
Specifies the length of time after going off-hook within which the first digit of a feature number or destination
must be dialed before a reorder tone is heard.
Default
250 s
Document Version 2011-10
4.5 [2-3] Timers & Counters
PC Programming Manual 369