Access Levels - Panasonic KX-NCP500 Programming Manual

2.1.2 Access Levels

Connection Settings for LAN
Setting
IP Address
Port Number
2.1.2 Access Levels
There are three main levels of access to the Maintenance Console: User, Administrator and Installer. Each
level has its own Programmer Code, which must be entered to run the Maintenance Console. The allowed
format for each programmer code is as follows:
User Level Programmer Code
Administrator Level Programmer Code
Installer Level Programmer Code
Access to menu options within the Maintenance Console is restricted depending on the Programmer Code,
and the current software mode (see 2.1.1 Starting Maintenance Console and Software Modes). When a
menu option is limited to certain access levels, this is noted in this manual in the initial description of that menu
option, for example:
"This option is only available at Installer level."
If a sentence like this does not appear under the heading, the menu option is available at all levels.
The target users for each access level are as follows:
Access Level
User
22 PC Programming Manual
Values
1.0.0.0–223.255.255.255
1–65535
Item
Explanation
Specify the IP address of the PBX on
the LAN. Enter the same IP address
that was input in IP Address for
IPCMPR Card (for KX-NCP500/
KX-NCP1000/KX-TDE100/
KX-TDE200)/IP Address for
IPCEMPR Card (for KX-TDE600) of
3.4 [1-1] Slot—Card Property -
IPCMPR (for KX-NCP500/
KX-NCP1000/KX-TDE100/
KX-TDE200)/IPCEMPR (for
KX-TDE600).
It is also possible to search for the IP
address by clicking Search.
Specify the port number used to
access the PBX via LAN. Enter the
same port number that was input in
Maintenance Port Number of
3.4 [1-1] Slot—Card Property -
IPCMPR (for KX-NCP500/
KX-NCP1000/KX-TDE100/
KX-TDE200)/IPCEMPR (for
KX-TDE600).
Length
0 – 16 characters
4 – 16 characters
4 – 16 characters
User
For end users
Document Version 2011-10