Panasonic KX-NCP500 Programming Manual page 249

Default
Current port number
Value Range
Port number
Maintenance Console Location
3.30 [1-1] Slot—Port Property - LCO Port
Programming Manual References
None
Feature Manual References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Maintenance Console Location
3.30 [1-1] Slot—Port Property - LCO Port
Programming Manual References
3.31 [1-1] Slot—Port Property - LCO Port—Connection Command
Feature Manual References
None
Dialing Mode
Selects the type of signal used to dial out to the analog CO line.
Default
DTMF
Document Version 2011-10
3.30 [1-1] Slot—Port Property - LCO Port
PC Programming Manual 249