3.36 [1-1] Slot—Port Property - T1 Port
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
3.36 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
3.1.15 CLIP (Calling Line Identification Presentation)
CO Dial Mode
Selects the type of signal used to dial out to a CO line.
Default
DTMF
Value Range
DTMF, Pulse
Maintenance Console Location
3.36 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
4.1.3 Dial Mode Selection
Channel Type
Selects the channel type.
Default
Undefined
Value Range
Undefined: Not assigned
GCOT: Ground Start Central Office
LCOT: Loop Start Central Office
DID: Direct Inward Dialing
TIE: TIE Line
OPX: Off Premise Extension
310
PC Programming Manual
Document Version 2011-10