Setting Date And Time - Kyocera TASKalfa 266ci Operation Manual

Before Using the Fax Machine > Setting Date and Time

Setting Date and Time

Set the local date and time at the place of installation.
When you send a fax using the transmission function, the date and time as set here will be printed in the header of the
fax. Set the date, time and time difference from GMT of the region where the machine is used.
NOTE
The user authentication screen appears. Enter your login user name and password, and press [Login]. Refer to
Adding a User in the machine's Operation Guide for the default login user name and password.
Be sure to set the time difference before setting the date and time.
The date and time are set using the Quick Setup Wizard when the machine is turned on for the first time after
installation.
1
2
3
Display the screen.
1
Set the time difference.
System Menu/Counter.
Date/Timer/Energy Saver
Date/Time
10/10/2012 10:10
1
Date Format
Time Zone
+09:00 Osaka, Sapporo, Tokyo
Auto Panel Reset
< Back
Select the region.
NOTE
If you have selected an area that observes daylight savings time, the Daylight Savings Time
Setup screen will be displayed. Press [On] or [Off].
Set the date.
System Menu/Counter.
Date/Timer/Energy Saver
Date/Time
10/10/2012 10:10
1
Date Format
Time Zone
+09:00 Osaka, Sapporo, Tokyo
Auto Panel Reset
< Back
Press [+] or [-] to set each of Year, Month, and Day.
2
10:10
2
DD/MM/YY
1/4
On
10:10
2
DD/MM/YY
1/4
On
1-10
System Menu/Counter.
System Menu
System/Network
Date/Timer/Energy Saver
Adjustment/Maintenance
Use [ ] or [ ] to scroll up and down.
System Menu/Counter.
Date/Timer/Energy Saver - Time Zone
+08:00 Ulaan Bataar
+08:00 Krasnoyarsk
+09:00 Seoul
Cancel
Use [ ] or [ ] to scroll up and down.
System Menu/Counter.
Date/Timer - Date/Time
Year Month
Cancel
10:10
5/5
10:10
21/25
OK
10:10
Day
3
Next >