Diskette Drive - Toshiba 400CS User Manual

4.5

Diskette Drive

Removing the Diskette Drive
To remove the internal diskette drive, follow the steps below and refer to figures 4-9 to 4-12.
1. Turn the computer's power off. Disconnect the AC power cord and all external
cables connected to the computer.
2. Remove the battery pack, optional PCMCIA card, and optional memory module as
described in sections 4.2, 4.3, and 4.4.
3. Turn the computer upside down.
4. Slide the release lever lock to unlock the release lever.
5. Pull up on the lever to unsnap it. Then, raise it gently until the diskette drive pops
out slightly. Don't force the lever back too far.
6. Grasp the drive and pull it out.
4-12
Figure 4-9 Removing the diskette drive
400 Series